Accu-Lube Lubricants
                 The natural choice in metalworking lubricants

Accu-Lube fluid lubricants are manufactured using non-toxic, renewable raw materials so they are environmentally safe and biodegradable. They contain no hazardous chemicals and none of the ingredients are subject to SARA (Superfund Amendment and Reauthorization Act) reporting. In addition to their environmental benefits, our lubricants are safe for use with all metals without fear of discoloration or damage.

Improve process quality:

When compared to traditional soluble oil mixtures, Accu-Lube lubricants offer a substantial increase in lubricity which reduces the friction that arises during the machining process. When there is no heat build-up tools last longer and part finish is improved. Accu-Lube products also work to optimize efficiency by eliminating of the maintenance, mist, and mess that come with flood coolant. These advancements promote efficient, improve product quality, and reduce operating costs.   

Reduce fluid use and eliminate disposal:

In a six month period average Accu-Lube customers are able to replace 55 gallons of coolant concentrate, equivalent to approximately 1,100 gallons of working flood coolant, with only 5 gallons of Accu-Lube lubricant. Manufacturers conserve fluid and reduce waste since Accu-Lube lubricant is used up during the cutting process. Expensive fluid disposal is eliminated and post-operation cleaning is simplified. 

Two General Classes of Lubricants, Plus Special Purpose:

Accu-Lube has two general classes of lubricants, first is the natural-based cutting lubricants which provide the maximum base-lubricity and performance.  They are thicker (higher viscosity) than the other class of lubricants.  Whenever possible it is recommended to use this first group of lubricants for the best performance.  Accu-Lube lubricants will not inherently stain any metal.  The single drawback when using these more viscous class of lubricants is they must be cleaned off before heat treating to prevent a carbon stain being left behind.  This concern mostly applies to aluminum extruders who saw or machine immediately after extrusion and prior to heat treating.  For these applications we have an entire second class of lubricants which are refined to a point where they will evaporate during the heat treating process and leave little or no residue behind.  
 

Natural-Based Fluid Lubricants
Cleaning Required Before Heat Treating

Accu-Lube LB-1000

A premium heavy-duty metalworking lubricant with chlorinated extreme pressure additives for machining, sawing, deep-hole drilling and large diameter tapping. 

Not recommended for use on titanium

A premium heavy-duty metalworking lubricant with non-chlorinated extreme pressure additives specially formulated for use with exotic alloys common to the aerospace industry.
 

A superior moderate to heavy-duty metalworking lubricant for general machining and sawing. Accu-Lube’s #1 selling product.
 

A superior moderate to heavy-duty metalworking fluid with non-chlorinated anti-wear additives that has been developed using only FDA approved ingredients. NSF H1 registered for use in food grade operations.
 

A superior heavy-duty metalworking lubricant with anti-wear and non-chlorinated extreme pressure additives specifically designed for stamping operations
 

A quality moderate-duty metalworking lubricant for general machining and woodworking operations.
 

Product Specifications

Natural-Based Fluid Lubricants
Cleaning Not Required Before Heat Treating

Accu-Lube LB-6100

A premium heavy-duty metalworking lubricant with non-chlorinated extreme pressure additives for machining, sawing, deep hole drilling and large diameter tapping.

A premium moderate to heavy-duty metalworking lubricant specifically formulated for aluminum machining and sawing.
 

A premium moderate-duty metalworking lubricant for machining and sawing.
 

A superior heavy-duty metalworking lubricant with anti-wear and non-chlorinated extreme pressure additives developed for stamping operations.
 

A moderate-duty metalworking lubricant designed for aluminum sawing.
 

An economical light-duty lubricant for aluminum extrusion machining and sawing.
 

Product Specifications

Accu-Lube Synthetic is a water-based, moderate-duty minimum quantity lubricant with non-chlorinated extreme pressure additives for near-dry metalworking. This multi-purpose lubricating fluid has the cooling properties of flood coolant with the lubricity and viscosity of straight oil. Unlike other water-based coolants which are designed for flood applications. Accu-Lube Synthetic lubricant is especially designed for near-dry machining and will resist misting while providing superior lubrication to the cutting edge.

Accu-Lube Synthetic II

Water-Based Stamping Lubricant

Synthetic II is an economical, moderate-duty minimum quantity lubricant with non-chlorinated extreme pressure and boundary additives for near-dry stamping. This water-based lubricating fluid provides excellent corrosion protection and is easy to clean.